Solventless epoxy self leveling floor paint is made of advanced epoxy resin and aliphatic curing agent, with inorganic wear resistant aggregate, special additives made of wear-resistant, shock resistant, self leveling floor coating.



Two, product features and applications:



Low viscosity, good leveling. It can form a variety of coating thickness at one time. No interface, one-time construction, excellent operation. High film strength and excellent adhesion. Gloss excellent.



Ground use of general buildings such as schools, hospitals, offices, computer rooms, etc.. GMP pharmaceutical, electronics, food processing plants, shopping malls, paper mills and other internal ground use.



Three, construction of



(1) coating,


The general provisions of self leveling coating construction shall comply with GB50212-91 base terms, with particular emphasis on the following factors:



            the basic strength of



The basic surface dry degree: basic water mortar and concrete rate shall not exceed 8%



The flat of “ ”



The basic surface smoothness of



(2), the construction process of



The surface treatment of



1).



2) processing base attachments: the primary surface adhesion of dust, dirt, cement mortar and boiling oil, must be removed thoroughly, especially oil use detergent scrub, need to rinse clean, fully dry (dry degree is subject to the moisture content of not more than 8%).



3) grinding, vacuum



4) surface defects (shell, crack, gap) with



         


The N50-1 epoxy floor paint and N50-1 coating curing agent by 5:1 mixing, adding 1-2 times the diluent, stir evenly, in accordance with the construction requirements of the plain ground roller coating 1-2 times, do not allow leakage of the place. After 24 hours or completely dry, go to the next step. When the undercoat is dry for more than 7 days, it must be sanded and then ground.



The coating of the coating



  N50-1 and N50-1 in epoxy floor paint coating curing agent is mixed by 5:1, adding special packing, with an electric mixer stirring, according to the thickness of take scraping or roller to the specified thickness, each time between the required interval of 24 hours or more.



The construction of self leveling coating non solvent the solventless epoxy self leveling floor paint two-component mixing ratio according to the provisions of 20&mdash, curing; 30 minutes later, with steamed bread knife to push coated on the other, with a foam roller defoaming, before and after the barrel material shall be continuous connection, can not be connected mark, smooth, three days after hardening to pedestrians, seven days after heavy pressure completely hardened.



Note:

(1) the paint must be fully stirred before use.



(2) indoor painting should be smooth air.



(3) construction vertical surface should be constructed first, so as not to pollute the horizontal surface.



(4) the material after mixing and mixing should be finished in the available time, and the material of the front and back barrels should be connected continuously so as to avoid the surface of the material close to the hardening and can not be leveling off.



(5) coating, surface does not allow large visual bubbles; if there is, to eliminate air bubbles with brush or roller in deaeration before hardening.



(6) mixing the paint mixture for a long time will affect the use of time and produce bubbles.



(7) the best construction temperature of solvent-free epoxy self leveling floor paint is 10~35 degrees centigrade, and the environmental humidity should not be greater than 80%, otherwise it will affect the quality after film formation.



Four, maintenance of


1, after the completion of the construction, coating curing period of 7 days, during the maintenance period to avoid rain and other liquid flushing or personnel trampling.



2. Daily cleaning can be done with soft broom or dishcloth.



3, serious dirt, the use of neutral detergent, washed with a cloth, and then wash with water, fully dry and beat a layer of wax.



4, spilled spilled acid, alkali and other chemicals, should be promptly cleaned with water, if the seasoning, oil and so on, you can wipe with a cloth.



5, smooth coating can be regularly maintained with bright wax, always beautiful.



Five,


1, according to the general dangerous goods treatment.



2, avoid skin and eyes directly contact with the product, if it splashes to the skin, first with clean yarn and chemical detergent wipe clean, wash the skin, rinse with water, if accidentally splashed into the eyes, rinse immediately with plenty of water immediately and go to the doctor.